Is the surface rough?
The pebbles used are finely screened and naturally tumbled, which means that even though the surface is bumpy, it is non-abrasive.

What happens when algae grows on the PEBBLE TEC®/PEBBLE SHEEN® finish?
Algae grows on anything. Proper maintenance will reduce the incidence of algae in any pool. Because the pebbles are non-porous, algae doesn't bond as readily to it as it does to plaster or marcite. That means it can be easily cleaned without damage to the surface.

Does the surface color vary?
PEBBLE TEC® and PEBBLE SHEEN® brand pool finishes are natural products and hand-finished, so variations in color and exposure are to be expected. These variations create a distinct, yet natural appearance.

Will pebbles fall off?
A small loss of pebbles is normal right after pool startups, but it's insignificant considering there are approximately 42 million pebbles in your pool.

Is there a warranty?
Pebble Technology's PEBBLE TEC® and PEBBLE SHEEN® brand pool finishes are installed only by authorized, licensed contractors who are required to provide a written warranty statement. Contact your pool builder or licensed applicator for details.

How do I take care of a PEBBLE TEC®/PEBBLE SHEEN® pool finish?
It's no different than caring for a plaster/marcite finish. The water chemistry should be maintained according to the "Saturation Index." There are many retail pool stores that provide computer testing to determine your pool water's saturation index.

If your pool builder does not provide this service, this type of balancing can be done at a local pool store that offers computerized water testing. For a dealer near you, check your local Yellow Pages, or contact BioLab at 1-800-998-7946 and choose the "BioGuard" option or check their website @ www.bioguard.com.

Do you recommend tile with a PEBBLE TEC® pool finish?
PEBBLE TEC® pool finish offers unlimited design possibilities with natural looking results by integrating the finish into waterfalls, boulders, beach entries, and etc. All swimming pools and water features require maintenance; however, a smooth tile surface at the waterline may be easier to clean than the PEBBLE TEC® finish at the waterline (since it is a bumpy surface). Keep in mind also that out of the water, it will have a dry look. Check with your builder for design and construction considerations when bringing PEBBLE TEC® pool finish out of the water.

Do you recommend tile with a PEBBLE SHEEN® pool finish?
Tiles should always be used in combination with PEBBLE SHEEN® pool finish. PEBBLE SHEEN® pool finish is not meant to come out of the water.

HOW DO I TAKE CARE OF A PEBBLE TEC® POOL?
Caring for a Pebble Tec® pool is no different than caring for a plaster/marcite pool. The water chemistry should be maintained according to the "Saturation Index." The saturation index measures the various factors in the pool water, such as pH, alkalinity, hardness, etc. and adjusts them according to a specific formula depending on the levels of each factor. There is not a standard level at which each factor is always kept. Based upon the results of the computerized testing, recommendations will be made as to what needs to be added to, or deleted from your pool water.